Specify when jobs run with `rules`

Use rules to include or exclude jobs in pipelines.

Rules are evaluated in order until the first match. When a match is found, the job is either included or excluded from the pipeline, depending on the configuration.

You cannot use dotenv variables created in job scripts in rules, because rules are evaluated before any jobs run.

Future keyword improvements are being discussed in our epic for improving rules, where anyone can add suggestions or requests.

`rules` examples

The following example uses if to define that the job runs in only two specific cases:

job:
  script: echo "Hello, Rules!"
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
      when: manual
      allow_failure: true
    - if: $CI_PIPELINE_SOURCE == "schedule"

If the pipeline is for a merge request, the first rule matches, and the job is added to the merge request pipeline with attributes of:
- when: manual (manual job)
- allow_failure: true (the pipeline continues running even if the manual job is not run)
If the pipeline is not for a merge request, the first rule doesn't match, and the second rule is evaluated.
If the pipeline is a scheduled pipeline, the second rule matches, and the job is added to the scheduled pipeline. No attributes were defined, so it is added with:
- when: on_success (default)
- allow_failure: false (default)
In all other cases, no rules match, so the job is not added to any other pipeline.

Alternatively, you can define a set of rules to exclude jobs in a few cases, but run them in all other cases:

job:
  script: echo "Hello, Rules!"
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
      when: never
    - if: $CI_PIPELINE_SOURCE == "schedule"
      when: never
    - when: on_success

If the pipeline is for a merge request, the job is not added to the pipeline.
If the pipeline is a scheduled pipeline, the job is not added to the pipeline.
In all other cases, the job is added to the pipeline, with when: on_success.

WARNING: If you use a when clause as the final rule (not including when: never), two simultaneous pipelines may start. Both push pipelines and merge request pipelines can be triggered by the same event (a push to the source branch for an open merge request). See how to prevent duplicate pipelines for more details.

Run jobs for scheduled pipelines

You can configure a job to be executed only when the pipeline has been scheduled. For example:

job:on-schedule:
  rules:
    - if: $CI_PIPELINE_SOURCE == "schedule"
  script:
    - make world

job:
  rules:
    - if: $CI_PIPELINE_SOURCE == "push"
  script:
    - make build

In this example, make world runs in scheduled pipelines, and make build runs in branch and tag pipelines.

Skip jobs if the branch is empty

Use rules:changes:compare_to to skip a job when the branch is empty, which saves CI/CD resources. The configuration compares the branch to the default branch, and if the branch:

Doesn't have changed files, the job doesn't run.
Has changed files, the job runs.

For example, in a project with main as the default branch:

job:
  script:
    - echo "This job only runs for branches that are not empty"
  rules:
    - if: $CI_COMMIT_BRANCH
      changes:
        compare_to: 'refs/heads/main'
        paths:
          - '**/*'

The rule for this job compares all files and paths in the current branch recursively (**/*) against the main branch. The rule matches and the job runs only when there are changes to the files in the branch.

Use variables in `rules:changes`

You can use CI/CD variables in rules:changes expressions to determine when to add jobs to a pipeline:

docker build:
  variables:
    DOCKERFILES_DIR: 'path/to/files'
  script: docker build -t my-image:$CI_COMMIT_REF_SLUG .
  rules:
    - changes:
      - $DOCKERFILES_DIR/**/*

You can use the $ character for both variables and paths. For example, if the $DOCKERFILES_DIR variable exists, its value is used. If it does not exist, the $ is interpreted as being part of a path.

Common `if` clauses with predefined variables

rules:if clauses are commonly used with predefined CI/CD variables.

The following example runs the job as a manual job in scheduled pipelines or in push pipelines (to branches or tags), with when: on_success (default). It does not add the job to any other pipeline type.

job:
  script: echo "Hello, Rules!"
  rules:
    - if: $CI_PIPELINE_SOURCE == "schedule"
      when: manual
      allow_failure: true
    - if: $CI_PIPELINE_SOURCE == "push"

The following example runs the job as a when: on_success job in merge request pipelines and scheduled pipelines. It does not run in any other pipeline type.

job:
  script: echo "Hello, Rules!"
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
    - if: $CI_PIPELINE_SOURCE == "schedule"

Other commonly used if clauses:

if: $CI_COMMIT_TAG: If changes are pushed for a tag.
if: $CI_COMMIT_BRANCH: If changes are pushed to any branch.
if: $CI_COMMIT_BRANCH == "main": If changes are pushed to main.
if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH: If changes are pushed to the default branch. Use when you want to have the same configuration in multiple projects with different default branches.
if: $CI_COMMIT_BRANCH =~ /regex-expression/: If the commit branch matches a regular expression.
if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH && $CI_COMMIT_TITLE =~ /Merge branch.*/: If the commit branch is the default branch and the commit message title matches a regular expression. For example, the default commit message for a merge commit starts with Merge branch.
if: $CUSTOM_VARIABLE == "value1": If the custom variable CUSTOM_VARIABLE is exactly value1.

Run jobs only in specific pipeline types

You can use predefined CI/CD variables to choose which pipeline types jobs run in, with:

The following table lists some of the variables that you can use, and the pipeline types the variables can control for:

Branch pipelines that run for Git push events to a branch, like new commits or tags.
Tag pipelines that run only when a new Git tag is pushed to a branch.
Merge request pipelines that run for changes to a merge request, like new commits or selecting Run pipeline in a merge request's pipelines tab.
Scheduled pipelines.

Variables	Branch	Tag	Merge request	Scheduled
`CI_COMMIT_BRANCH`	Yes			Yes
`CI_COMMIT_TAG`		Yes		Yes, if the scheduled pipeline is configured to run on a tag.
`CI_PIPELINE_SOURCE = push`	Yes	Yes
`CI_PIPELINE_SOURCE = schedule`				Yes
`CI_PIPELINE_SOURCE = merge_request_event`			Yes
`CI_MERGE_REQUEST_IID`			Yes

For example, to configure a job to run for merge request pipelines and scheduled pipelines, but not branch or tag pipelines:

job1:
  script:
    - echo
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
    - if: $CI_PIPELINE_SOURCE == "schedule"
    - if: $CI_PIPELINE_SOURCE == "push"
      when: never

Complex rules

You can use all rules keywords, like if, changes, and exists, in the same rule. The rule evaluates to true only when all included keywords evaluate to true.

For example:

docker build:
  script: docker build -t my-image:$CI_COMMIT_REF_SLUG .
  rules:
    - if: $VAR == "string value"
      changes:  # Include the job and set to when:manual if any of the follow paths match a modified file.
        - Dockerfile
        - docker/scripts/**/*
      when: manual
      allow_failure: true

If the Dockerfile file or any file in /docker/scripts has changed and $VAR == "string value", then the job runs manually and is allowed to fail.

You can use parentheses with && and || to build more complicated variable expressions.

job1:
  script:
    - echo This rule uses parentheses.
  rules:
    - if: ($CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH || $CI_COMMIT_BRANCH == "develop") && $MY_VARIABLE

Avoid duplicate pipelines

If a job uses rules, a single action, like pushing a commit to a branch, can trigger multiple pipelines. You don't have to explicitly configure rules for multiple types of pipeline to trigger them accidentally.

Some configurations that have the potential to cause duplicate pipelines cause a pipeline warning to be displayed.

For example:

job:
  script: echo "This job creates double pipelines!"
  rules:
    - if: $CUSTOM_VARIABLE == "false"
      when: never
    - when: always

This job does not run when $CUSTOM_VARIABLE is false, but it does run in all other pipelines, including both push (branch) and merge request pipelines. With this configuration, every push to an open merge request's source branch causes duplicated pipelines.

To avoid duplicate pipelines, you can:

Use workflow to specify which types of pipelines can run.

Rewrite the rules to run the job only in very specific cases, and avoid a final when rule:

job:
  script: echo "This job does NOT create double pipelines!"
  rules:
    - if: $CUSTOM_VARIABLE == "true" && $CI_PIPELINE_SOURCE == "merge_request_event"

You can also avoid duplicate pipelines by changing the job rules to avoid either push (branch) pipelines or merge request pipelines. However, if you use a - when: always rule without workflow: rules, GitLab still displays a pipeline warning.

For example, the following does not trigger double pipelines, but is not recommended without workflow: rules:

job:
  script: echo "This job does NOT create double pipelines!"
  rules:
    - if: $CI_PIPELINE_SOURCE == "push"
      when: never
    - when: always

You should not include both push and merge request pipelines in the same job without workflow:rules that prevent duplicate pipelines:

job:
  script: echo "This job creates double pipelines!"
  rules:
    - if: $CI_PIPELINE_SOURCE == "push"
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"

Also, do not mix only/except jobs with rules jobs in the same pipeline. It may not cause YAML errors, but the different default behaviors of only/except and rules can cause issues that are difficult to troubleshoot:

job-with-no-rules:
  script: echo "This job runs in branch pipelines."

job-with-rules:
  script: echo "This job runs in merge request pipelines."
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"

For every change pushed to the branch, duplicate pipelines run. One branch pipeline runs a single job (job-with-no-rules), and one merge request pipeline runs the other job (job-with-rules). Jobs with no rules default to except: merge_requests, so job-with-no-rules runs in all cases except merge requests.

Reuse rules in different jobs

Use !reference tags to reuse rules in different jobs. You can combine !reference rules with regular job-defined rules. For example:

.default_rules:
  rules:
    - if: $CI_PIPELINE_SOURCE == "schedule"
      when: never
    - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH

job1:
  rules:
    - !reference [.default_rules, rules]
  script:
    - echo "This job runs for the default branch, but not schedules."

job2:
  rules:
    - !reference [.default_rules, rules]
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
  script:
    - echo "This job runs for the default branch, but not schedules."
    - echo "It also runs for merge requests."

CI/CD variable expressions

Use variable expressions with rules:if to control when jobs should be added to a pipeline.

You can use the equality operators == and != to compare a variable with a string. Both single quotes and double quotes are valid. The variable has to be on the left side of the comparison. For example:

if: $VARIABLE == "some value"
if: $VARIABLE != "some value"

You can compare the values of two variables. For example:

if: $VARIABLE_1 == $VARIABLE_2
if: $VARIABLE_1 != $VARIABLE_2

You can compare a variable to the null keyword to see if it is defined. For example:

if: $VARIABLE == null
if: $VARIABLE != null

You can check if a variable is defined but empty. For example:

if: $VARIABLE == ""
if: $VARIABLE != ""

You can check if a variable is both defined and not empty by using just the variable name in the expression. For example:

if: $VARIABLE

Compare a variable to a regular expression

You can do regular expression matching on variable values with the =~ and !~ operators. Variable pattern matching with regular expressions uses the RE2 regular expression syntax.

Expressions evaluate as true if:

Matches are found when using =~.
Matches are not found when using !~.

For example:

if: $VARIABLE =~ /^content.*/
if: $VARIABLE !~ /^content.*/

Additionally:

Single-character regular expressions, like /./, are not supported and produce an invalid expression syntax error.
Pattern matching is case-sensitive by default. Use the i flag modifier to make a pattern case-insensitive. For example: /pattern/i.
Only the tag or branch name can be matched by a regular expression. The repository path, if given, is always matched literally.
The entire pattern must be surrounded by /. For example, you can't use issue-/.*/ to match all tag names or branch names that begin with issue-, but you can use /issue-.*/.
The @ symbol denotes the beginning of a ref's repository path. To match a ref name that contains the @ character in a regular expression, you must use the hex character code match \x40.
Use anchors ^ and $ to avoid the regular expression matching only a substring of the tag name or branch name. For example, /^issue-.*$/ is equivalent to /^issue-/, while just /issue/ would also match a branch called severe-issues.

Store a regular expression in a variable

Introduced in GitLab 15.0 with a flag named ci_fix_rules_if_comparison_with_regexp_variable, disabled by default.

Generally available and feature flag ci_fix_rules_if_comparison_with_regexp_variable removed in GitLab 15.1.

Variables on the right side of =~ and !~ expressions are evaluated as regular expressions. The regular expression must be enclosed in forward slashes (/). For example:

variables:
  pattern: '/^ab.*/'

regex-job1:
  variables:
    teststring: 'abcde'
  script: echo "This job will run, because 'abcde' matches the /^ab.*/ pattern."
  rules:
    - if: '$teststring =~ $pattern'

regex-job2:
  variables:
    teststring: 'fghij'
  script: echo "This job will not run, because 'fghi' does not match the /^ab.*/ pattern."
  rules:
    - if: '$teststring =~ $pattern'

Variables in a regular expression are not resolved. For example:

variables:
  string1: 'regex-job1'
  string2: 'regex-job2'
  pattern: '/$string2/'

regex-job1:
  script: echo "This job will NOT run, because the 'string1' variable inside the regex pattern is not resolved."
  rules:
    - if: '$CI_JOB_NAME =~ /$string1/'

regex-job2:
  script: echo "This job will NOT run, because the 'string2' variable inside the 'pattern' variable is not resolved."
  rules:
    - if: '$CI_JOB_NAME =~ $pattern'

Join variable expressions together

You can join multiple expressions using && (and) or || (or), for example:

$VARIABLE1 =~ /^content.*/ && $VARIABLE2 == "something"
$VARIABLE1 =~ /^content.*/ && $VARIABLE2 =~ /thing$/ && $VARIABLE3
$VARIABLE1 =~ /^content.*/ || $VARIABLE2 =~ /thing$/ && $VARIABLE3

The precedence of operators follows the Ruby 2.5 standard, so && evaluates before ||.

You can use parentheses to group expressions together. Parentheses take precedence over && and ||, so expressions enclosed in parentheses evaluate first, and the result is used for the rest of the expression.

Nest parentheses to create complex conditions, and the inner-most expressions in parentheses evaluate first. For example:

($VARIABLE1 =~ /^content.*/ || $VARIABLE2) && ($VARIABLE3 =~ /thing$/ || $VARIABLE4)
($VARIABLE1 =~ /^content.*/ || $VARIABLE2 =~ /thing$/) && $VARIABLE3
$CI_COMMIT_BRANCH == "my-branch" || (($VARIABLE1 == "thing" || $VARIABLE2 == "thing") && $VARIABLE3)

Troubleshooting

Unexpected behavior from regular expression matching with `=~`

When using the =~ character, make sure the right side of the comparison always contains a valid regular expression.

If the right side of the comparison is not a valid regular expression enclosed with / characters, the expression evaluates in an unexpected way. In that case, the comparison checks if the left side is a substring of the right side. For example, "23" =~ "1234" evaluates to true, which is the opposite of "23" =~ /1234/, which evaluates to false.

You should not configure your pipeline to rely on this behavior.

Specify when jobs run with rules

rules examples

Run jobs for scheduled pipelines

Skip jobs if the branch is empty

Use variables in rules:changes

Common if clauses with predefined variables

Run jobs only in specific pipeline types

Complex rules

Avoid duplicate pipelines

Reuse rules in different jobs

CI/CD variable expressions

Compare a variable to a regular expression

Store a regular expression in a variable

Join variable expressions together

Troubleshooting

Unexpected behavior from regular expression matching with =~

Specify when jobs run with `rules`

`rules` examples

Use variables in `rules:changes`

Common `if` clauses with predefined variables

Unexpected behavior from regular expression matching with `=~`